50 Comments

  1. Karl Jones on October 14, 2019 at 3:11 pm

    lol yeah



  2. Derek Jackson on October 14, 2019 at 3:15 pm

    i think it would be easier to like shred the fingers up. or crush them first somehow.



  3. FLAVIO DIAS on October 14, 2019 at 3:16 pm

    Very very good movie. Greetings here from Brazil.



  4. BETOOLS DEL RYEGOBI on October 14, 2019 at 3:20 pm

    100% REAL NO FAKE!!!



  5. Daniel McLaughlin on October 14, 2019 at 3:22 pm

    Good PSA!



  6. Ovidio Alvarez on October 14, 2019 at 3:24 pm

    Could have got a more gold out the waste solution.



  7. Matthew Lach on October 14, 2019 at 3:26 pm

    Mr. Sreetips, in this video you only refine the gold fingers from Slot Cards or whatever. But my question is I thought IC chips and even maybe transistors have pleaded gold in them also. Am I wrong or am I right? I trust your answer. I definitely don’t know what I’m doing or what is what it’s just what I have kept hearing and come to believe!? Aren’t there other things on circuit boards that contain gold?



  8. Nolks Entertainment Group on October 14, 2019 at 3:26 pm

    Roughly 500 dollars worth.



  9. Tomasz Bebenek on October 14, 2019 at 3:26 pm

    hello.what you do test, with what paper and substance in 41 min film?



  10. Tito Denino on October 14, 2019 at 3:27 pm

    45:30 your welcome



  11. SΓ©rgio Alves Cordeiro on October 14, 2019 at 3:28 pm

    πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘πŸ‘!!!!!!!!! Excelente!!! MagnΓ­fico!!!



  12. Darnnel Jones on October 14, 2019 at 3:29 pm

    This guy paid 800 USD for scraps!? This man is not very smart.



  13. Graham Wagner on October 14, 2019 at 3:30 pm

    Thank you for the clarification sir. Always seemed like no profit in my opinion. The cost outweighs the profit and disposing of harsh chemicals is an important factor.
    Aggravating to watch you to go through this effort for loss, thank you for your sacrifice brother.



  14. Lord Carl on October 14, 2019 at 3:31 pm

    I should have paid attention in chemistry class. πŸ™



  15. Reaper_ExD on October 14, 2019 at 3:32 pm

    People confuse the copper in the components for gold. Only scrap worth collecting is the gold tips of the processors



  16. David Fitzgibbons on October 14, 2019 at 3:32 pm

    Thanks for the video



  17. dhare07 on October 14, 2019 at 3:34 pm

    Glad I caught this video before going into electronic scraping. Thank you for sharing your skill and knowledge.



  18. Ahmed Kareem on October 14, 2019 at 3:34 pm

    You paid too much for the fingers it worth less than that



  19. A B on October 14, 2019 at 3:34 pm

    Looks like something out of Breaking Bad πŸ˜‚πŸ˜‚πŸ˜‚



  20. Anthony Cook on October 14, 2019 at 3:35 pm

    So what you’re saying is…. Sell the fingers instead!



  21. vincent williams on October 14, 2019 at 3:35 pm

    He literally looks like hes about to create the powerpuff girls in that white coat.



  22. Jacob Lattimore on October 14, 2019 at 3:37 pm

    Very cool process. It’s a real shame that this isn’t a more economically viable way to make some extra cash on the side. Thank you for going through all the trouble to do this experiment, especially since your taking a huge loss. I for one appreciate it.



  23. Johnathan Grey on October 14, 2019 at 3:38 pm

    I hope everyone knows not to but gold online.



  24. Tristen Shumway on October 14, 2019 at 3:38 pm

    That’s way cool! I’ve wanted to do this for years but the glassware you use will get the average person put on the government watch list for Meth, PCP, and MDMA making tools… Thanks for sharing!πŸ‘πŸ‘



  25. Go Jim on October 14, 2019 at 3:40 pm

    Nice video. But you forgot to add cost of your solutions, electricity and workforce. The loss was even higher.



  26. Microbyte VAX11/780 on October 14, 2019 at 3:40 pm

    2 by 2 hands of blue.



  27. Daniel Kelly on October 14, 2019 at 3:40 pm

    Nilered has a better video, there are better chemical processes to strip and completely dissolve the gold into solution, your method looks a bit antiquated and may be why your yield is so low. But thanks for detailing the process you chose to use.



  28. Tristen Shumway on October 14, 2019 at 3:41 pm

    How do you get rid of the waste chemical??



  29. Gods Army on October 14, 2019 at 3:42 pm

    Your videos are just awesomeπŸ™ŒπŸ»πŸ’―πŸ‘πŸ»πŸ˜Ž can you do a video on how to extract gold coated necklaces rings etc. to separate the gold from the metal?



  30. Stephen Ziegler on October 14, 2019 at 3:43 pm

    Awesome videos on your channel! I only see one problem…there are still several spaces where you haven’t written "SREETIPS" in sharpie…lol…



  31. Covencraft on October 14, 2019 at 3:43 pm

    Sounds like gold processing with extra steps.



  32. assassin9 on October 14, 2019 at 3:48 pm

    My new favorite channel. Streetips



  33. Liberallez on October 14, 2019 at 3:48 pm

    Good stuff!!! Thank you!!!



  34. Jessie Gray on October 14, 2019 at 3:49 pm

    Thanks for the information.



  35. Ali munir Rana on October 14, 2019 at 3:49 pm

    Overhead costs… Material costs are missing and also other expenses like electricity use and alot of hidden cots. So if you had scrap yard where people dispose such things then you can be millionaire but in years πŸ€£πŸ˜‚πŸ˜… I would like to call computer alchemist era 🀣🀣🀣🀣



  36. itchy johnson on October 14, 2019 at 3:50 pm

    500.00



  37. nombre apellido on October 14, 2019 at 3:52 pm

    What do you do with the leftover chemicals used in all your experiments?



  38. Chase on October 14, 2019 at 3:55 pm

    Thanks for the knowledge



  39. Jared on October 14, 2019 at 3:56 pm

    Thankyou bud



  40. MickyR on October 14, 2019 at 3:59 pm

    Another myth about gold in PCs is that they use it because its more conductive, in actual fact, copper is far more conductive but the problem is copper oxidizes, gold does not so they mix gold into the coatings to slow the rate of oxidation of the copper so the PC lasts alot longer



  41. Victor Bulat on October 14, 2019 at 4:00 pm

    800$ FOR equipment necessities,that stays after,need to find more 5kg of circuit schemes,.nice video.



  42. TheAyhan76 on October 14, 2019 at 4:03 pm

    Can you tell me what your experience is where most of the gold is to be recovered,😊



  43. Pertinent Paradigm on October 14, 2019 at 4:04 pm

    An honest man is rare in today’s Clown World, especially one with such expertise willing to play the part of the fool to prove a point. I appreciate that. VBIQVE LOGOS



  44. LoneWolf7878 gmail on October 14, 2019 at 4:05 pm

    How come you didn’t incinerate the PCB fingers first?



  45. BaSsAholiC on October 14, 2019 at 4:05 pm

    Unless you get free scrap computers you can’t turn a profit. I get free computers fairly often but I never deal with all that.



  46. CE_Stocks on October 14, 2019 at 4:07 pm

    I am curious to know your thoughts on a computer recycling business and if it could be lucrative. I can imagine there are a number of metals that can be collected from computers apart from gold. The plastics, glass and any batteries could also be recycled. Obviously buying fingers form Ebay is not my intention but if I was able to create collection points in my given area along with say 1-2 pick up drivers that could visit businesses and collect E-Waste. Is there any better methods of separating out these metals? My initial thoughts is to have one big grinder where everything gets dumped into…that travels on to a separator conveyor which separates ferrous from non-ferrous, then on to a burner to melt away any plastics/papers…that heat could also be used to generate power that back-feeds into the plant. the left overs should be glass and non-ferrous metals which can be further melted and kilned since they have different melting points. Thoughts?



  47. TheAyhan76 on October 14, 2019 at 4:07 pm

    Your the best for real information



  48. normwicks@youtube on October 14, 2019 at 4:07 pm

    The container of gold used in this picture is mine its 50 p ounds of pins i put in it .my gold is 4 pounds equels 6.9 grams .i have 50 pounds of pins .i was one of tge first .normwicks@you tube.a ny firm assayed my gold .



  49. DeltroxTv on October 14, 2019 at 4:08 pm

    Btw at 25:15 you said you got off the water. Use a drop of dish soap next time before you do that it will break the surface tension of the water making all the gold foil sink,meaning that you can siphon off more water meaning quicker filtering process.



  50. Daniel Morenault on October 14, 2019 at 4:09 pm

    actually your only correct to a certain point, newer computers dont have much in them, that is where your are correct, but if you stumble on to a huge stockpile of old desktop pcs like i did, with ceramic cpu’s with solid gold pins and wiring, not plated, old hard drives with solid gold pieces weighing .6 grams+ alone, not to mention the pins are heavily plated much more then any other pins, not to mention that it has several ic;s and eeproms that have solid gold wiring, and the the ceramic chips with gold or gold plated caps. what makes the 1/4 ounce myth true is if your dealing with old pc’s. the gold plating tech sucked bad back so in the begining things were much more heavily plated back then, then they are nowadays, and and has been very skimpy for the last 30 to 35 years. so the whole key is to buy old desktop towers and dismantle them yourselves, dont bother with the monitors, but the must be old, like back when a 33mhz cpu with was the bomb and having 16mb a ram was godlike lol. i dismanteled 8 old desktops, ill post the finishing total weight when finsihed, there are so many different karats to deal with, ill combine everything, and purify it to .999, then ill post the total weight. im retired so i have lots of spare time, and it is time consuming so you have top consider that too, if you have the time, but when I bought 200 old desktop towers for $200, im pretty sure ill make around a $100 a tower scrapping gold out of all parts, and that being conservative, so the myth holds true for the old old pcs, back in the day when you were running windows 3.1, 95, 98, and so yes the myth holds true for newer pc’s, so then its not worth if unless you got free time and can get them for free or very very cheap, like a $1 to $5, anf then $5 might be to much.